All posts by Karen Callahan

3 Tips for Choosing the Best Dent Repair Services

3 Tips for Choosing the Best Dent Repair Services

If you had an accident in your vehicle, the damages may not be extensive. In fact, if your car was only tapped or lightly bumped by another vehicle during the incident, you may only have a few dents that need to be repaired. Even though small dents may not appear to be a big problem, they can affect the overall value of your vehicle. Specifically, if the dents are not removed correctly and the paint job is not completed correctly. Whatever the case or situation, you should always make sure that you choose the best dent repair service possible for your specific circumstances. That being said, here are a few tips that you should review before you select an auto body shop to remove these dents from your vehicle.

Tip #1 – Look for Auto Body Shops that Does Superior Work

3 Tips for Choosing the Best Dent Repair Services

When you are doing your research, you should start by looking for auto body shops that perform superior work. Because your car is often one of the biggest investments that you may possess, you should make sure that it is treated properly at all times. This is especially true in cases where dents need to be removed properly and restored to pre-damage condition. By taking special care in finding the best shops, you can protect your investment so that you will always get the maximum amount, if you decide to sell your vehicle to another driver.

Tip #2 – You May Want to Go Mobile Instead of using the traditional auto body Repair facility Shops

3 Tips for Choosing the Best Dent Repair Services

The traditional auto body repair shop is not the only option that you have access to today. This is because some auto body shops have extended their services to mobile dent repair services too. Therefore, if you want to take advantage of the benefits that mobile services offer, you can contact a special mobile technician that will come to you. At your home, your school, your job and other locations, these technicians will travel wherever you are on that specific scheduled time to perform the services that you need. These conveniences can be invaluable for those with very busy schedules and those vehicle owners that have problems taking off the job without losing pay. So, you should review this option to see if it meets your needs and preferences.

Tip # 3 – You May Only Need Paintless Dent Removal Service

3 Tips for Choosing the Best Dent Repair Services

Today’s auto body repair technicians have access to a wide range of different innovative auto body shop repair tools. Many of these tools are designed to correct defects in a vehicle without having to take any of the vehicle’s body parts off to make the repairs. For instance, dents on a vehicle can be pulled out with ease by using the appropriate dent removal tools. These tools are also great for providing paintless removal services. Also, these special tools and equipment can also reduce the cost of repairs substantially. In some cases, the estimate for your dent removal needs can drop by as much as 70% because the paint job can be eliminated completely.

How to use a Belt Sander

A belt sander is used to rapidly grind down a piece of wood or some other object. They are normally used at the beginning stages of the sanding process. A belt sander can also be used to remove paints or other types of covering such as finishing. Here is a quick and easy guide that will show you how to use the #1 belt sander.

belt sander

Safety First

When you use your belt sander make sure you have some basic safety gear on hand. You do not have to put on full body armor but you should at least wear safety goggles, a long sleeve shirt and maybe a pair of gloves. Gloves might not be necessary but can be worn to protect a person’s hands against nicks and cuts.

Prepare your Work Area

Belt SanderYour work area is very important. Make sure it is clear and free from objects. You should also have the material that you are going to sand close by so you do not have to search for it. Make sure the board you are going to stand is locked into place. Never hold an object while you use your belt sander. You could end up injuring your hand.

When a you sand an object you have to keep the cord out of the way. The cord can ruin the sanding process so it should be wrapped up in a certain way or placed over your shoulder. Just make sure that you leave enough of the cord to get the job done.

How to Sand an Object

Raise the sander slightly off of the object you going to file. Turn the machine on and then ease it down onto the object. Once the sander meets the object’s surface, then draw the machine back toward you. This will be your first sanding stroke. The trick to using a belt sander is to keep the sander connected to the surface without causing it to bump around.


belt sander

As you sand your object and come close to the perimeter of the piece; make sure you only go no more than 1/3 over the edge of the board. If you go over more than a 1/3 over the edge you could easily damage the object. You should also use a pencil to mark the direction you should sand a piece.

Also, keep sand dust out of the way. Sand dust can easily clog your machine or make you work harder to sand a piece. The best way that you can learn how to use your sander is to practice, practice, practice. Once you become familiar with your equipment, you’ll be sanding like a pro in no time at all.

Tips for Selling Diamonds


The best way you can earn some extra money is if you sell an engagement ring. Whether it is because you do not want it anymore, it reminds you of a past relationship or you just need the money, you need to know about your ring. The more information you have about the setting and the diamond itself, the more you are going to get for it and also avoid being taken advantage of.

Know the setting

Find out about the ring you have. If you are not sure of what you have, you should take it to an appraiser or to a jewelry store and have it appraised. This will make sure that when you go to sell the ring, someone will not tell you that you have gold when it is diamond.

History of the ring

It is vital that you know about the rings history. If you happen to have bought the ring on an auction and it belonged to someone famous, this will add value to it. You should bring documentation with you though. No one will believe you that the ring belonged to the queen and king of England unless there is real paperwork. Vintage settings are going to be worth more since their style is trending and very few jewelers are not using those settings. Any type of documentation that you can bring with you is going to be helpful.

Know the diamond


When you are selling diamonds, you need to know

about them. There is a difference between a low clarity white diamond and one that is yellow. Remember the four Cs which are clarity, color, cut and carat weight. You need to find out the grade of your diamond ring on each of these criteria before heading out to any jewelry store.

If you are the one that bought the diamond, you might have the original certificate with you. If you have it, carry it and ensure that the money you will be getting for it is commensurate with the quality and characteristics of the stone. If you do not have the certificate, you need to have the stone appraised.

Know where to take the diamond ring

You can choose to take it to a diamond store, jewelry shop or a pawn shop. Each one is going to give you a different value of your ring and offer you different amount for it. Since you will go with the highest bidder, you need to visit a few more places. Pawnshops are in business to make more money and they will give you as little as they can so that they can profit. People at jewelry stores are going to keep what they wish from the ring and then melt down what they do not want. Diamond stores deal with diamonds and they are likely to offer you more money for the stone. Visit this site to get some details on how much your diamond is worth too.

With the above information in mind, you are sure to sell your diamond ring and also make a lot of money from it.